MATERIAL SAFETY DATA SHEET
Section 1. Product General Information And Company Identification
Product Name |
Indium-Tin Oxide |
UN Number |
Not applicable |
CAS # |
50926-11-9 |
WHMIS Classification |
This is not a controlled product |
Chemical Formula |
90%In2O3/10% SnO2 |
Chemical Family |
Not applicable |
Product Use |
Thin films,Glass ,optical intruments etc. |
Available Packaging |
25kg, 50kg, 1000kg Or as per customer’s requirements |
Responsible Party |
Solution Resources Corporation (SRC)
Rm706,East Star Building,1508 Jiangpu Rd. Shanghai China
Post Code:200092
For further information,please contact SRC MSDS coordinator
at +86 13817363982
Working time:9:00am-17:00pm , Monday-Friday |
Section 2. Hazardous Ingredients
TLV (Units) |
Not Established |
Section 3 PHYSICAL DATA
Boiling Point 760 mm Hg: |
N/A |
Melting Point: |
1500oC |
Specific Gravity (H2O=1): |
N/A |
Density,gm/cc: |
7.16 |
Volatiles by Weight: |
0 |
Solubility in H2O: |
Negligible (<0.1%) |
Appearance and Odor: |
Powder: White to pale yellow; target: grey |
Section 4 FIRE AND EXPLOSION HAZARDS DATA
Flash Point (Method Used) |
N/A |
Autoignition Temperature |
N/A |
Flammable Limits: Upper |
N/A |
Lower |
N/A |
Extinguishing Media |
Oxide does not burn, use extinguishing media appropriate for surrounding fire |
Special Fire Fighting Procedures |
N/A |
Unusual Fire & Explosion Hazard |
N/A |
Section 5. HEALTH HAZARD INFORMATION
Threshold Limit Value |
Not established |
Effects of Over Exposure |
None Identified |
EMERGENCY AND FIRST AID PROCEDURES: |
EYES |
Flush with copious amounts of water for at least 15 minutes |
SKIN |
Flush with soap and water |
INHALATION |
Seek medical attention. Remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen |
INGESTION |
Seek medical attention. If swallowed, if conscious, immediately induce vomiting |
Section 6. REACTIVITY DATA
Stability |
Stable |
Incompatibility (Material to Avoid) |
None Identified |
Hazardous Decomposition Products |
None known |
Hazardous Polymerization |
Will not occur |
Section 7. SPILL OR LEAK PROCEDURES
Steps to Be Taken in Case Material Is Released or Spilled |
Sweep or scoop up and remove |
Waste Disposal Method |
Dispose of in normal refuse |
Section 8. SPECIAL PROTECTION INFORMATION
Respiratory Protection: |
Filter, dust, fume, mist. Use a respirator for dusty conditions. |
Section 9. SPECIAL PRECAUTIONS
Other Handling and Storage Conditions |
Not classified as hazardous by DOT, UN or IMCO. |
Issued by: Jack Liu
Issue Date: November 1999
|
